Nail polish is used for nail enhancement. Unlike ordinary nail polish, nail polish can dry naturally quickly, but it must be dried with an ultraviolet lamp. Because nail polish glue contains light effect solidifying glue, this kind of glue will solidify under ultraviolet radiation, thus achieving the shaping effect. The usage of nail art lamps is as follows:

1. Firstly, you need to plug in the power and turn on the switch. Some nail art lights do not have a switch button, but instead use infrared sensing. In this case, the light will only turn on when you reach inside, and when you leave, the light will turn off.

2. After applying nail polish, put your hand in it and set the time according to the situation. The time is generally 30 seconds, 60 seconds, 120 seconds. Generally, 90 seconds is the appropriate drying time.

3. When the time comes, the nail art light will automatically turn off, and then just take out your hand.

Generally, nail polish will be applied twice when making nails, which will have better color rendering effect, so the nail lamp should also be illuminated twice. The lamp tubes in nail art lamps are replaced almost every six months. When replacing or cleaning the lamp tubes, simply pull out the bottom. When using, be careful not to look directly at the lamp tubes and try to use them according to the instructions. Do not shorten or exceed the time limit.

It should be noted that the light of the nail polish lamp belongs to long wave ultraviolet radiation, which generally does not cause serious damage to the skin, but can also cause skin tanning and aging. Therefore, it is best to apply sunscreen on the hands before shining on the nail polish lamp, which can slow down the aging of the hand skin.