The power of the phototherapy machine is closely related to the dried speed. 9 watts, the sealing layer takes 4-6 minutes to completely dry, 36 watts of 2-3 minutes are fine, and 48 watts can be within 1 minute.

At present, there are two types of LED phototherapy and UV phototherapy meters on the market. There are also LED+UV nail phototherapy machines combined with two. Short time use.

If you use it frequently and do not allow your nails to be beautiful all the time, then choose a slightly larger power, a more complete function, and a faster speed, such as 36W/48W LED or LED+UV nail lights.

You ask you too many times and downlights too many times, bright and simple.

Color temperature:

Generally, there are 3000K, 3500K, 4000K, the smaller the value, the warmer the light, the larger the value, the colder the color, the 4000K used in my living room, and the 3500K for the bedroom for warm use.

Watts:

The higher the wattage, the brighter the light, and the light will not be too bright or white. I think the 6W of my home feels just right.

Beam angle and showing fingers:

The shining angle of the shot light (beam angle) is dominated by 15 degrees to 70 degrees, and there are 120 degrees and 180 degrees. The angle is 38 degrees of light.

Focus on:

1. Don't hit the gypsum line too high like me so that the light effect will not look good.

2. Do not turn on the light hole like me. Be sure to design a good distance, or the amount of size is good after the gypsum line is completed to avoid secondary rework.

3. When changing the hydropower, determine the position of the lights first, and then open the hole.